test
Proffie Lightsaber Operation Manual
- Video Tutorial:
One Button Sabers
SABER OFF
Power on: Hold the button until it illuminates.
BLADE OFF
Ignition:
- Tap the button, or
- Twist the saber (if enabled), or
- Thrust forward (if enabled), or
- Swing the saber (if enabled)
Muted ignition: Double tap the button and hold.
Enter/Exit Volume Menu: Hold the button and clash the saber.
Increase Volume: Tap the button while in menu.
Decrease Volume: Hold and release the button while in menu.
Next Preset: Hold and release the button (~1 second).
Previous Preset: Hold the button.
Play/Stop Music: Double tap the button.
Check Battery Level: Triple tap the button.
Power off: Hold the button until the light turns off.
BLADE ON
Retraction:
- Hold the button until it begins retracting, or
- Twist clockwise (if enabled), or
- Pull backwards (if enabled)
Smooth Swing: Move the hilt around
Spin: Spin or move the hilt quickly
Blaster Block: Tap the activation button
Flash on Clash: Hit the saber/blade
Lock Up: Hold the button and clash the hilt
Force Effect: Angle the hilt upwards, hold the button and twist.
Stab: Thrust forward into a clash
Melt Effect: Hold the button, thrust forward into a clash.
Drag Effect: Angle the hilt down, hold the button and clash.
Change Colour:
- Angle the hilt downwards Hold the activation button and twist, or
- Hold the button for 2 flashes (~1 second)
Enter/Exit Battle Mode: Triple click the button and hold.
Enter Multi-Block Mode: Swing and hold the button for 1 second, then release
Exit Multi-Block Mode: Tap the button
Enter Colour Change Mode: Angle the hilt downwards, hold the button and twist.
Confirm Colour: Hold the button until audio confirmation
Two Button Sabers
Power on: Hold the activation button until it illuminates.
BLADE OFF
Blade length Toggle: Press the power button 6 times to toggle between 82 and 92cm blade lengths.
Ignition:
- Tap the Main button, or
- Twist the saber
Muted ignition: Double tap the button and hold.
Next Preset: Tap the Aux button (hilt level or angled upwards)
Previous Preset: Tap the Aux button (hilt angled downwards)
Power Off: Press the Aux button 3 times.
BLADE ON
Retraction:
- Tap the Main button, or
- Twist the saber
Smooth Swing: Move the hilt around
Blaster Block: Tap the Aux button
Lockup: Hold the Aux button and clash the saber
Flash on Clash: Hit the saber/blade
Drag Effect: Hold the Aux button and then stab downwards.
Stab Effect: Forward thrust clash
Melt Effect: Hold any button and thrust forward into a forward clash
Lightning Block: Hold the Main button and tap the Aux.
Force Effect: Hold the Main button and release (~1s)
Change Colour: Hold the Aux button and tap the Main button. Slowly rotate the lightsaber to change the blade colour. Tap the Main button to select.
Adjust Volume: Enter volume adjustment mode by holding the Main and Aux buttons simultaneously. An audio prompt will indicate success. Adjust the volume up or down by pressing the Main or Aux button respectively. Long press the Aux button to exit the mode.
Play/Stop Music: Long press the Main button
Enter Multi-Block Mode: Hold the Aux button for ~1 second, then release. Swing to trigger blaster blocks.
Exit Multi-Block Mode: Any button press or a clash/stab etc
Enter/Exit Battle Mode: Hold the Aux button and swing
Power off: Tap the Main button