Neopixel Lightsaber Tutorial

Neopixel is divided into single button and double button

Operation Manual-One Button

When saber turn off
• Beeps when batteries are installed correctly.
• Turn on: Hold the button then tap.
• Adjust volume: Hold the button for 1 seconds.
• Switch boot effect: Hold the button for 2 seconds.
• Switch blade effects: Hold the button for 3 seconds.
• Switch soundfonts: Hold the button for 4 seconds.
• Power saving mode: No operation for 20 minutes.
When saber turn on
• Blaster: Tap the button.
• Lock-up: Hold the button for 1 seconds.
• Color change: Hold the button for 2 seconds.
• FOC off/on: Hold the button for 3 seconds.
• Turn off: Hold the button for 4 seconds.
// Sense operation
When saber turn off
• Turn on: Twist the saber.
• Switch BGM: when the blade is down, Hold the button then twist saber.
• Switch soundfonts: when the blade is up, Hold the button then twist saber.
When saber turn on
• Turn off: Twist the saber.
• Color change: when the blade is down, Hold the button then twist saber .
• FOC: hit the saber.
• Drag: Hold the button then hit the saber.
• Melt: Hold the button then thrust the saber.
• Force: when the blade is up, Hold the button then twist saber.

Two-Button Lightsaber Operation Manual-PWR/AUX

br />• Beeps when batteries are installed correctly.
• Turn on: Tap the PWR.
• Switch soundfonts: Tap the AUX.
• Adjust volume: Tap the PWR and AUX at the same time to enter, Then tap the
PWR to increase the volume, tap the AUX to decrease the volume.
• Switch boot effect: Hold the PWR then release.
• Switch blade effects: Hold the AUX then release.
• Power saving mode: No operation for 20 minutes.
When saber turn on
• Turn off: Tap the PWR.
• Blaster: Tap the AUX .
• Lock-up: Hold the AUX then release.
• FOC off/on: Tap the PWR and AUX at the same time.
// Sense operation
When saber turn off
• Turn on: Twist the saber.
• Switch BGM: When the blade is down, Hold the AUX button then twist saber.
• Switch soundfonts: When the blade is up, Hold the AUX button then twist saber.
When saber turn on
• Turn on: Twist the saber.
• Color change: When the blade is down, Hold the AUX button then twist saber .
• FOC: Hit the saber.
• Drag: Hold the PWR button then hit the saber.
• Melt: Hold the AUX button then thrust the saber.
• Force: When the blade is up, Hold the AUX button then twist saber.